RF-Max Digimax 210 Manual do Utilizador descarregar pdf (Página 8)

112

Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk

Keene Electronics Catalogue 2005 Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk

XCAM2 X10 WIRELESS VIDEO CAMERA

surveillance kits

The XCAM2 (top) is a tiny colour video camera (with

audio) that transmits its AV output as an RF signal to

a receiver (bottom) up to 30m away. The easy way to

add camera surveillance to your home or office.

Simply fasten the camera to the wall and connect to

any suitable power supply. Then connect the video

and audio outputs from the receiver to your VCR or

TV, switch on and watch! Great for security, baby

monitoring etc.

Where does the "X10" bit come in?

You don't have to have X10 to make use of the

camera, it works perfectly well straight out of the

box, but if you do have X10 it makes it easier to

control additional cameras. The special X10

controllable camera power supply (XM11U) can be set

to a specific X10 address, meaning you could have several cameras in

different locations, each with its own unique X10 address and then

switch them on and off as required with an X10 controller. The supply

is also intelligent in that it automatically switches off whenever it

detects an "on" command for any other address on the same x10

circuit. This means you can easily scan via X10 by simply switching the

"on" command for the camera you want without worrying about first

switching any of the others off.

Can the camera be located outside? Yes, although ideally it should be

sheltered, eg inside a porch or under the soffits. The camera base can

be screwed to a wall or mounted on a tripod. The X10 supply cable

supply is 2m long, coupling to a further 2m cable on the camera itself.

SPECIFICATIONS:

CAMERA: Single chip CMOS, 1/3" format with 307k active pixels. On

chip auto exposure, automatic gain control, auto white balance.

Moulding in plastic, splash proof to IP53

Viewing angle 40 degrees; Light sensitivity 100 lux; Power 12v DC;

Transmitter frequency 4 channel selectable 2.411GHz, 2.434GHZ,

2.453GHz, 2.473GHz; RF range up to 30m

RECEIVER: Power 12v DC; Frequency 4 channel selectable as per

camera; AV output 1 x RCA phono composite video 1v p-p, 1 x RCA

phono audio 1v p-p; Dimensions 153 x 100 x 140mm

Starter kit consists of one camera, one XM11U X10 controllable power

supply, one receiver with mains supply, scart and phono cables.

[XCAM2] £69.99

Additional camera and XM11U X10 controllable power supply as

included in XCAM2 starter kit

[XCAM2C] £59.99

Kit consisting of one XCAM2 plus two additional cameras (three

cameras in total). Choose this option if you want multiple cameras and

already own some X10 equipment to switch with. Save £14.98 over

individual prices.

[XCAMKIT] £249.99

Extended kit consists of the XCAMKIT above plus 1 x TM12U

transceiver Module plus 1 x HR10 remote control. Choose this option if

you want multiple cameras and don't already own any X10

equipment. Save £19.98 over individual prices.

[XCAMKIT2] £299.99

X10 kits

Pronto/RC5000 X10 STARTER PACK

When used in conjunction with an X10 receiver, the Pronto/RC5000

can be used to turn electrical appliances on and off and even

dim/brighten* the lights throughout your house! Now you can have

complete control of your home as well as your Home Theatre. All you

need is:

•A Pronto or RC5000 remote control

•An IR Commander (that turns the IR signal into X10 commands)

•A lamp/appliance module (that responds to the X10 commands)

•The X10 Infra red codes (provided by Keene as a CCF file on CD)

How does it all work? It’s easy - just unplug a lamp from the wall,

plug in a lamp module then plug the lamp back in. Plug the IR

commander in wherever its convenient (within line of sight of your

favourite armchair!) and then use your remote to switch your lamp

on/off and make it dim* or brighten* at will. With this system you can

control an unlimited number of lamps and other appliances.

Additional modules and X10 controllers can easily be added at any

stage in the future.

*Any type of lamp can be turned on and off (as can any mains

appliance) but the dim/brighten command can only be used on lamps

with conventional tungsten bulbs. Fluorescent energy saver type bulbs

and low voltage halogen bulbs cannot be dimmed with this system.

How much is it? The normal prices are: IR Command centre [IR7243]

£39.99, Lamp Module [LM12U] £24.99 each, Appliance module

[AM12U] £24.99 each. However, buy this special X10 remote starter

package for all Pronto/RC5000 users for just £79.00 (£67.23 ex VAT)

Order code [X10RP] £79.00

LK15 starter kit

An X10 kit consisting of 1 x LM15 bayonet lamp

module, 1 TM13 Transceiver module (which also

acts as a 1KW appliance module) and 1 x KR22

slim keychain remote control. The remote

supports up to four different addresses making

it easy to expand the system with extra light or

appliance modules.

[LK15] £39.99

Pan & tilt base for XCAM2

An ideal accessory for your XCam2, the

Robocam is a motorised platform that allows

you to sweep your Xcam2 left to right and up or

down, (240° x 130°). With the remote control

you can position the camera to monitor

whatever you want and store up to 4 positions

to "sweep" in memory. The system is

expandable as the single remote lets you control

up to 4 Robocams or scan each of them so as to display the image

from each camera in turn on your TV.

PLEASE NOTE!

The Robocam base contains a radio receiver so that it can respond to

the included remote control, but to control multiple cameras you will

need an ADDITIONAL transceiver module TM12U set to the same

house code. Please also note that the RoboCam does NOT include an

XCam2 camera, you must buy this separately.

[ROBOCAM] £149.99

X10 Security kits

MS9700 security kit

Contains (price if bought separately £404.92 - save

££££s!)

1 x SC2800 Telephone Base Station

1 x KR21E Key Fob remote

2 x DS10E door/window sensor

1 x MS10E motion sensor

1 x SM600 remote control

1 x LM12U lamp module

Order Code [MS9700] Total kit price £249.99

KR21E Key Fob

remote (for easy

arm/disarm)

[KR21E] £29.99

SM600 remote

control (for full

remote system

control)

[SM600] £24.99

DS10E

Door/window

sensor

[DS10E]£29.99

GB10E glass break

sensor

[GB10E] £34.99

MS10E PIR motion

sensor

[MS10E] £49.99

Security kit components: RF transmitter modules for use

with the SC2800 Telephone Base Station

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários

RF-Max Digimax 210 Manual do Utilizador Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Termóestatos RF-Max Digimax 210